Axles - Thompson

Andy Thompson of the Thompson Bicycle Company of Huddersfield used a version of a tricycle axle designed by Eric Tremaine in 1980 and shown in this copy of his original drawing.
The main features of this axle are:

1. One Wheel Drive (left)
2. Journal Bearings 3. Square Parallel Ends to the shafts - same dimensions as cotterless bottom bracket axles. 4. The block boss screwed onto the drive shaft.
5. Hubs threaded to accept cotterless crank extractor tool to facilitate quick and easy wheel removal. 6. The derailleur gear mechanism hanger brazed to the right hand axle casing inner bearing housing, which, together with a narrow “cage” around the block, places the jockey wheels and block closer together, making for better gear changes.

A number of the axles still exist, but not in their original frames. They were originally fitted to Thompson Trikes. Use this link or go to Trike Frames in the menu to read the short and very chequered history of the Thompson Trke Frame.

Contributed by and with thanks to:

Dave Hardy
Mick Madgett
Martin Purser
Clifford and Eric Tremaine
Dave Wright

If you have any information which you would like to put on this page please contact the TA Webmaster by e-mail or by post or telephone - see Contact for details.